A high resistance alternative to n90. Great for high wattage and voltage devices, regulated devices and high ohm low wattage scenarios. Very resistant to corrosive materials. And has a higher operating temperature than Nichrome.
Available in 27.0 foot lengths gauges 24, 26, 28
24g – .51mm / 2.07 ohms/ft
26g – .40mm / 3.31 ohms/ft
28g – .32mm / 5.27 ohms/ft
Kanthal A1 Resistance Wire Specifications
22% chromium (Cr), 5.8% aluminum (Al), Iron (Fe) balance
Density: 7.1 g/cubic cm
Tensile strength: 680 n/mm²
Melting Temperature: 1500°C (2732°F)
Maximum Operating Temperature: 1400°C (2552°F)
Warning To Consumer:
Rebuildable atomizers are intended for advanced users, rebuildable atomizers should NOT be used with anything other than IMR batteries and are NOT intended for users who have no multi-meter nor knowledge of how to use a meter. Rebuildable atomizers cannot safely be used by inexperienced users or users who do not have basic knowledge of electronics.
- Wicks and coils MUST be tested before use, if not tested they could harm the user.
- Rebuildable Atomizers are intended to be used on Mechanical Mods by advanced users only.
- Rebuildable Atomizers WILL destroy electronic devices if coils and wicks are not built correctly.
To master advanced vape topics you may refer to DukhanStore Blog for many useful articles.
IMPORTANT LIABILITY STATEMENT
Terms of Use:
- Must be 21 years of age or older.
- Must understand Ohm’s Law V= I * R
In no event shall Dukhan Store be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products. By using this product, you agree to abide by the aforementioned terms.
By purchasing this product you agree that you have read the disclaimer.
التقييمات
لا توجد تقييمات بعد.