Q16 Pro Starter Kit
JustFog Q16 Pro Kit with 900 mAh battery and Q16 Pro clearomizer which allow you adjust the airflow. Q16 Pro Clearomizer using Japanese Organic Cotton Coil. 900 mAh 4 stage battery, these are designed to perfection from the best materials available on the market. Charged by 5pin Micro USB cable
• Battery colour to choose: Blue, Pink, Black, Silver
• Battery capacity: 900 mAh Li-ion battery
• Output voltage: 1 LED (3.5V), 2 LED (3.8V), 3 LED (4.1V), 4 LED (4.4V) – please use proper PG:VG ratio liquid. With too thin liquid and high voltage (V) you can burn the coil.
• Expected Charging time: 2.5 – 3.0h
• Recommended resistance: 1.0 – 3.0Ω
• Q16 Pro Clearomizer: 1.9ml capacity 16x60mm – weight 22g
• Thread: eGo / 510
• Q16 Pro Battery: 16.5mm x 25.2mm x 70.4mm – weight 38g
• Total weight: 60g (without liquid)
• Cut-off time: 10 seconds
• Short circuit protection: LED blinks 2 cycles in White- Blue – Red sequence
• Overheating protection: If the battery power button ispressed more than 10 seconds, LED blinks 4 cycles in White – Blue – Red sequence and the protection circuit shuts down the power to prevent overheating.
• Overdischarge protection: When the battery goes down to a certain voltage, the protection circuit will cut off the power to prevent any performance degradation of the battery.
• Overcharge ptotection: When the battery is fully charged, the protection circuit will cut off the power t prevent safety accidents caused by overcharge.
• Overvoltage charge protection: If charging voltage is higher than 6 voltages, the circuit will automatically block the charging power
• Temperature Protection: When temperature of battery circuits (PCBa) reaches to 75C, power shuts down automatically and LED blinks 4 cycles in White – Red sequence.
• Charged by 5pin USB cable.
The battery is equipped with the system signaling the battery charge level:
– 100- 65%, 3 LED will light
– 65 – 30%, 2 LED will light
– 30% and under 1 LED will light
– When the battery is nearly discharged. Red LED Light Blinks 4 time
• JUSTFOG Q16 Pro Clearomizer – 1 pcs
• Q16 Pro Battery (900 mAh) – 1 pcs
• 14 series Organic Cotton Coil – 1 pcs
• User guide
All batteries come with a 4-Click ON/OFF feature. To turn the battery ON, click the button rapidly 4 times in 2 seconds. Do the same to turn the battery OFF.
How to charge
• Easy to charge via Micro 5pin USB port. When battery indicate that is full, disconnect the wire. Never leave connected for night time.
• USB Charger must be connected to DC 5V Adapter for Safety
How to fill the JUSTFOG Q16 Pro Clearomizer
1. Make sure the clearomizer is detached from the battery.
2. Unscrew the top cap of the clearomizer. Please see the picture above
3. Fill your liquid into the tank, making sure to pour it in from the side, so that the liquid is cascading down the sides of the tank walls. Make sure not to get any liquid into the center airflow hole.
4. Screw the top cap back onto the clearomizer body. Let the tank stand for 5 minutes, so the cotton can be saturated with vape juice before using.
5. Screw the clearomizer onto your battery.
6. Vape and enjoy!
How to fit / exchange coil
لا توجد تقييمات بعد.