The Justfog Q16 Pro | P16a | Q14 Coils. These coils are available in two different ohm ratings, which are suitable for MTL use. The coils are supplied per 5 pieces.
Justfog Q16 Pro | P16a | Q14 Coils
These coils are made for the Q16 Pro, P16a and the Q14 set. The coils are available in 2 variants both of which are suitable for MTL use.
The 1.6ohm coil is the heaviest of the two. This coil operates at a fairly low wattage. This gives the feel of a traditional cigarette. These coils are best used with a minimum of 70PG/30VG liquids. Because the coils operate at a fairly low wattage and the orifices are very small, the liquid must be thin enough to soak into the coil in time. When using liquid that is too thick, such as 50PG/50VG or 30PG/70VG, the coil may burn out if vaporized too quickly, or simply because the liquid cannot be drawn into the coil.
The 1.2ohm coil is the lighter version. This coil operates at a slightly higher wattage which provides more flavor and vapor. Also with this coil, you get the feel of a traditional cigarette. For this coil, we recommend a liquid ratio of up to 50PG/50VG. It is also important not to use too thick a liquid for these coils, for the same reasons. With these coils, also be careful not to use too thin a liquid. This is because otherwise the coil can quickly leak or also burn out because the liquid evaporates too quickly.
Tips For Use
Before you can use the coil, it will have to soak with e-liquid. You can do this by filling the tank with e-liquid, then letting the coil draw for 10 minutes without using it. This allows the coil to be filled with e-liquid. After that, the tank is ready for use. We recommend that you always use the correct ratio of e-liquid. For this set, we recommend a liquid ratio of at least 70PG for the 1.6ohm coil and up to 50PG for the 1.2ohm coil. Because you use the right e-liquid, the coil will last longer. The coils last an average of 1 to 2 weeks. This of course depends on usage. If the coil tastes burnt, it also needs to be replaced.
لا توجد تقييمات بعد.