Arcana 22 RTA DLC
Arcana 22 RTA DLC “Black Silk” is the DLC (diamond-like-carbon) coated version of the extremely popular high-end RTA from Arcana Mods and Pipeline Store. The DLC coating is made of a carbon base and is extremely durable, as well as a high quality finish. This RTA has a diameter of 22mm and is suitable for MTL as well as RDL and DL. The basic configuration is designed for MTL (mouth-to-lung) and can be optionally upgraded and converted with RDL or DL airscrews.
The design of the Arcana 22 RTA is kept simple and noble. The Arcana 22 RTA is made of 316L stainless steel and no O-rings are visible from the outside. The DLC version comes with the Diamond Kit look.
The RTA has a small evaporation chamber and the deck is kept generous and very easy to handle. The Arcana 22 RTA produces a flavorful vapor pleasure.
To close the liquid control, the TopCap is turned counterclockwise. In doing so, the TopCap is opened at the same time. A clockwise rotation opens the Liquidcontrol and closes the TopCap again.
The tank of the Arcana 22 RTA holds 3.5ml of liquid and yet this RTA is very small with 34.5mm.
Included with the Arcana 22 RTA are four airflow screws, which are screwed in over the positive terminal from below. This is very convenient because the winding does not need to be changed or disassembled. The airflow can be fine-tuned with the adjustable airflow control. This allows the speed of the airflow to be adjusted according to your own needs.
Also included in the package are a glass tank and a PSU tank. The included mouthpiece is two-piece and consists of a base in stainless steel and the actual mouthpiece in POM. The Drip Tip is compatible with the Chariot Drip Tips.
Notes:
– This is an RTA and comes without a coil. This must be installed by yourself. RTAs are suitable for experienced Vaper.
– Please avoid opening the base. If you disassemble the base of your Arcana 22 RTA, please make sure that the AFC slot is correctly aligned during assembly.
Putting the Arcana 22 RTA into operation
– Turn and pull the tank upwards to detach it from the base.
– Prepare a coil (we recommend a coil with an inner diameter of 2.5mm) and position it between the poles. Push the wire ends into the slots provided and tighten the pole screws. Remove the wire ends; they must not come into contact with other components.
– The 510 positive pole with 1.2 mm air nozzle that is pre-installed in the scope of delivery can be replaced at any time, using a slotted screwdriver.
Inserting the cotton
– Carefully pull the cotton through the coil.
– Cut both ends of the cotton flush with the base (22 mm) or alternatively at an angle. For best results, we recommend cutting the cotton at an angle.
– Thin out the ends of the cotten as required (this is not essential with diagonally cut cotton) and place them in the pockets provided on the deck. You can now adjust the height of the coil as needed to customise the vape experience to your habits. However, we recommend leaving the height of the coil as intended.
Filling the tank
Turn the top cap counterclockwise to close the liquid supply and open the top cap. You can now remove the topcap and fill the tank with liquid through the two slots above the tank.
Turn the top cap clockwise to close the top cap and open the liquid control. Your Arcana 22 RTA is now ready for use.
For transport, you can close the liquid control of the atomizer by turning the tank counterclockwise and open it again after transport by turning it clockwise.
The tank can also be pulled upwards when filled, but should not be tilted. Alternatively, the filled tank can also be removed upside down.
Arcana 22 RTA DLC Material:
– Stainless steel components: 316L stainless steel DLC finishing
– tank sleeves: glass and PSU
– insulators: PEEK
Features Arcana 22 RTA DLC:
– Filling from the top
– Glass and PSU tank
– No O-rings visible
– Liquid Control (infinitely adjustable)
– Close LC and remove Topcap with a twist
– Very small evaporation chamber, for an extra intense flavor
– Generous deck for easy coil installation
– PEEK insulator
– 4 AFC pins, changeable via 510 positive pole, even with coil installed
– External Airflow Control for fine adjustment of air or air speed (6 levels)
– MTL, RDL (with optional AFC pins) and DL (with optional AFC pins)
– 316L stainless steel
– 510 connector
Scope of delivery Arcana 22 RTA DLC Set:
1 x Arcana 22 RTA DLC with glass tank
1 x Arcana 22 “Diamond Cut” Driptip Base with Arcana 22 mouthpiece made of POM
1 x mouthpiece “curvy” made of POM
1 x PSU tank
4 x AFC screw (0.8mm, 1.0mm, 1.2mm pre-installed and 1.4mm)
1 x spare parts (O-rings, screws and insulators)
1 x instruction manual
التقييمات
لا توجد تقييمات بعد.